Parameter for LED Troffer Retrofit KIt
ITEM | DESCRIPTION | WATTS | LUMENS PERFORMANCE |
WL-TRRS2224 | 2X2 Troffer Rertrofit Input Voltage:AC100~277V,50/60Hz Ra:>80,PF>0.9 CCT:3500k/4000k/4500k/5000k Beam Angle:120 Degreen Lens:PC diffuser Light Source:LM80 SMD2835 Driver:UL Class II Dimension:L23.74”xW23.74”xh1.97” | 24W | Min.3000LM 125-130Lm/W |
WL-TRRS2236 | 36W | Min.4500LM 125-130Lm/W |
WL-TRRS2424 | 2X4 Troffer Rertrofit Input Voltage:AC100~277V,50/60Hz Ra:>80,PF>0.9 CCT:3500k/4000k/4500k/5000k Beam Angle:120 Degreen Lens:PC diffuser Light Source:LM80 SMD2835 Driver:UL Class II Dimension:L23.74”xW23.74”xh1.97” | 24W | Min.3000LM 125-130Lm/W |
WL-TRRS2436 | 36W | Min.4500LM 125-130Lm/W |
WL-TRRS2442 | 42W | Min.5250LM 125-130Lm/W |
WL-TRRS2450 | 50W | Min.6250LM 125-130Lm/W |
Features for LED Troffer Retrofit KIt
1. 2×4 : 24W/36W/42W/50W
2×2 : 24W/36W
2.Ultra-thin,H:45mm
3.lumen efficiency up to 125-130Lm/W
4.Optional microwave sensor
5.Internal Driver
6.Standard PC diffuser
7.1-10V Dimming optional
8. Easy to install
9.Warranty: 5 years
Detail image of LED Troffer Retrofit KIt
The WL-TRRS22/24 LED troffer fixture is a design based on the idea of green energy . It saves about 50% energy compared with the fluorescent troffer. The WL-TRRS22/24 accepts 120-277VAC, and have a high lumen efficiency up to 125-130Lm/W. With well-distributed and soft light, high stability, long life, elegant and special external design. This Luminaries is regarded as the leading of greening Lighting for commercial and industrial uses.
Creatificate for LED Troffer Retrofit kit
For DLC, please check in website: , search by keyword "wisdom light" for more details of interested items.
Mounting for LED Troffer Retrofit kit
1.Disconnect power of existing fixture.
2.Remove door frame (if installed) and lamps. If clearance permits, abandon ballast and socket bars inside the existing fixture. Otherwise remove them as needed. Please dispose lamps, door frame and ballast properly.
3.Lift luminaire existing housing and slide in both mounting brackets between the housing and the grid. Lower luminaire onto mounting brackets.
4.Hang the LDR by its hinges on one of the mounting brackets.
5.Install disconnect Power as wiring diagram shown above.
6.Wire the existing fixture ground wire to the supplied ground wire/s. If no ground wire exists from the power supply, add ground wire to the existing luminaire housing. The LDR must be properly grounded.
7.Close the Fixture and secure both latches on other side.
8.Reconnect main power.
Quality Control for LED Troffer Retrofit kit
Widomled has very strict Quality Control System, from checking and evaluation of incoming materials to the delivery of products, each item will be checked and tested for several times.
Application for Troffer LED Light
Wisdomled led torffer light widely used in Office , School , Hospital , Library , Public Room , Utility Areas etc...